Top 5 Sock RFQ Fields That Change Factory Quotes

Byline: Vincent Xi, Editorial Author, ZheSock, https://www.zhesock.com/authors/vincent-xi/. A sock RFQ template should price one makeable product. Not a mood board. The five fields that usually change factory quotes are construction, yarn, artwork, quantity split, and approval rules. Add acceptance criteria before the first sample. Add packing checks before bulk packing starts. Treat figures in this guide as example calculations to verify in the supplier quote unless a named source is given. Ask the factory to confirm each item in writing before you compare prices.
- 1. 1. Product Construction: Needle Count, Terry, And Size Range
- 2. 2. Yarn Content: Percentages, Yarn Count, And Proof
- 3. 3. Artwork: Color Count, Logo Method, And Placement
- 4. 4. Quantity: MOQ, Color Split, And Price Breaks
- 5. 5. Packing, Inspection, And Compliance Documents
- 6. 6. Lead Time, Evidence, And What To Verify
1. Product Construction: Needle Count, Terry, And Size Range
A quote request for "cotton crew socks" is too loose. A factory needs sock type, height, size range, machine needle count, terry coverage, toe type, cuff structure, and target pair weight. One missing line can change yarn use, knitting minutes, boarding time, and carton volume.
Example calculation to verify in the supplier quote: adult crew sock, 168 needles per cylinder, EU 39 to 44 size scope, 18 cm cuff height measured from heel point, half terry from heel to toe, linked toe, 2x1 rib cuff, and target 55 grams per pair after boarding. A 144-needle full terry sport sock at 72 grams per pair needs a different quote because loop yarn use and knitting time are higher.
Write acceptance criteria as numbers, not taste words. Example criteria to verify in the supplier quote: finished pair weight 55 grams with plus or minus 5 percent tolerance after approved pre-production sample, cuff height 18 cm with plus or minus 0.5 cm tolerance, flat foot length per approved size chart with plus or minus 0.5 cm tolerance, and no open toe seam after stretch check. Use these as buyer examples, not as ZheSock factory promises.
- Needle count field: state 144 needles, 168 needles, or 200 needles per cylinder as the machine reference. This is a production spec, not a quality grade.
- Terry field: state no terry, half terry foot, full terry foot, or full terry sock. Terry adds loop yarn and can reduce output per machine shift.
- Size field: give one size scope per SKU, such as EU 39 to 44 adult. Do not write "one size fits most."
- Weight field: ask the factory to quote target grams per pair and allowed tolerance after sample approval.
- Fit field: ask for a size set sample when the RFQ covers more than one size band, such as EU 35 to 38 and EU 39 to 44.
Commercial trade-off: a heavier sock may feel better in hand, but it raises yarn cost and shipping weight. A finer 200-needle sock may give cleaner artwork, but it can increase machine constraints and sample time. Ask the factory to price the base construction and one alternate construction on separate RFQ lines.
2. Yarn Content: Percentages, Yarn Count, And Proof
Yarn is often the largest quote driver. Do not write "cotton rich" or "premium yarn." Write fiber percentages, main yarn count, elastic placement, and any required certificate. If the factory may change yarn to meet a target price, make that an approved option in the RFQ.
Example calculation to verify in the supplier quote: 78 percent combed cotton, 19 percent polyester, and 3 percent elastane by pair weight for one adult crew sock style, quoted as USD per pair under FOB Ningbo terms. For a finer dress sock, another example calculation is 200 needles per cylinder, no terry, 32s/1 cotton main yarn, and 38 grams per pair after boarding. The supplier should confirm yarn count, not only the fiber label.
Add substitution rules. Example rule to verify in the supplier quote: no change to fiber percentage, yarn count, or elastic yarn brand after pre-production sample approval unless the buyer gives written approval. If the factory proposes 75 percent cotton instead of 78 percent cotton to reduce unit price, request a revised material breakdown, sample pair weight, and handfeel comparison before approval.
- Material field: state fiber percentage by pair weight and ask whether percentages are based on finished pair, yarn purchase record, or labelling estimate.
- Yarn count field: ask for main yarn count, plating yarn, and elastic yarn location, such as cuff only or full sock body.
- Color control field: state Pantone references and ask for lab dip or yarn cone approval before bulk knitting.
- Risk control field: ask the factory to flag yarns that have long lead time, high shade variation, or minimum dye lot limits.
Name standards only when the buyer or sales channel requires them. OEKO-TEX concerns tested harmful substances in textiles. GOTS concerns organic textile processing scope. GRS concerns recycled material chain of custody scope. A factory practice is not the same as a current certificate. Ask for holder name, certificate number, scope, product coverage, and expiry date before you treat any standard claim as valid.
Commercial trade-off: asking for current certificate copies can add document review time, but it reduces retail risk. Using stocked yarn can shorten sampling, but it may limit color matching. Custom-dyed yarn can improve shade match, but MOQ and lead time may rise.
3. Artwork: Color Count, Logo Method, And Placement
Artwork changes programming time and defect risk. A stripe sock, a jacquard logo sock, and a sock with silicone grip print should be separate RFQ lines. The factory should not infer logo size from a photo.
Example calculation to verify in the supplier quote: one adult crew sock style with a 35 mm wide ankle logo on the outer side, 4 jacquard yarn colors per row in the logo area, Pantone references supplied by the buyer, and mirrored placement on left and right socks. If the same job also needs embroidery, woven labels, or grip print, list each process with size and location.
Set artwork acceptance criteria before programming. Example criteria to verify in the supplier quote: logo width 35 mm with plus or minus 2 mm tolerance after boarding, logo position 65 mm below cuff edge with plus or minus 5 mm tolerance, no missing yarn floats on the visible logo face, and left and right socks matched as approved in the pre-production sample. For small letters below 5 mm height, ask the factory to confirm whether jacquard knitting can hold the detail.
- Jacquard field: give maximum colors per row, total colors per sock, and whether the motif wraps around the leg or foot.
- Embroidery field: give logo width in millimeters, stitch area, thread colors, and placement from cuff edge or heel point.
- Grip print field: give print coverage in square centimeters per pair, silicone color, and any buyer-named wash or rub test.
- File field: attach vector artwork, Pantone references, and a marked sock layout with dimensions.
- Approval field: ask for a digital knitting mockup first, then a physical proto sample, then a pre-production sample made with approved yarn and packing components.
Sample approval should freeze the visual rules. A practical approval path is proto sample for construction and artwork placement, revised proto if measurements fail, pre-production sample for final yarn and packing, then bulk start only after written buyer approval. Keep one approved sample at the factory and one with the buyer for inspection comparison.
Commercial trade-off: jacquard is efficient for knitted logos but can lose detail in tiny marks. Embroidery can sharpen small marks but adds process cost and may feel thicker on the leg. Grip print gives function for yoga or baby socks, but it needs extra curing and packing care.
4. Quantity: MOQ, Color Split, And Price Breaks
Total pairs are not enough. The RFQ must show quantity by style, color, and size. A 3,000-pair order in 1 color is different from 3,000 pairs split across 6 colors. The second case is 500 pairs per color, with more yarn changes, setup time, packing checks, and shade control.
Example calculation to verify in the supplier quote: 1,200 pairs total for one adult crew sock style, 4 colors, 300 pairs per color, EU 39 to 44, packed 1 pair per polybag. If the supplier MOQ is 500 pairs per color for that yarn and artwork, the buyer has four options: raise volume, reduce colorways, accept a surcharge, or change supplier.
Ask for price breaks in the same RFQ table. Example calculation to verify in the supplier quote: quote 500 pairs per color, 1,000 pairs per color, and 3,000 pairs per color for the same 168-needle half terry adult crew sock, FOB Ningbo, USD per pair, quote validity 15 calendar days from supplier issue date. Keep Incoterms fixed when comparing prices.
- MOQ field: request MOQ by SKU, color, and size, not only total order MOQ.
- Split field: state size ratio per color, such as 60 percent EU 39 to 42 and 40 percent EU 43 to 46, if the range is split.
- Surcharge field: ask whether low color quantity, custom dyeing, label setup, or carton printing carries a separate charge.
- Overrun field: state accepted shipment tolerance, such as plus or minus 3 percent by SKU, as an example to verify in the supplier quote.
- Cancellation field: ask when yarn, artwork setup, or packing components become non-cancelable costs.
Source context: ZheSock sourcing pages have described low-volume custom sock production options around 100 pairs per design. Treat that as first-party website context, not a fixed quote for every material, color, or process. Ask for written MOQ by SKU, color, and size.
Commercial trade-off: more colors can help a retail range, but each color can add approval work and shade risk. A lower MOQ can help market testing, but unit price may rise because setup cost is spread over fewer pairs. A higher quantity can reduce unit price, but it increases inventory risk if size ratio or color demand is wrong.
5. Packing, Inspection, And Compliance Documents
Packing is a real line item. Bulk packing in one polybag is not the same as retail packing with belly band, hook, size sticker, barcode label, inner carton, and export carton mark. The RFQ should say who supplies barcode numbers, dielines, label files, carton mark rules, and any retail packing test.
Example calculation to verify in the supplier quote: 1 pair per printed belly band, 12 pairs per inner carton, 120 pairs per export carton, carton gross weight limit of 15 kilograms per carton for the buyer's warehouse, and carton marks supplied before bulk packing. If the buyer changes from bulk packing to retail packing after sample approval, unit price and lead time may change.
Add packing acceptance criteria. Example criteria to verify in the supplier quote: barcode scan pass on 10 packed pairs per SKU during packing start, size sticker matched to pair size on 100 percent of checked retail packs, carton mark matched to purchase order and SKU, export carton gross weight not above 15 kilograms per carton, and no mixed colors inside an inner carton unless the packing instruction allows assortments.
- Packing sample field: require one approved packed sample per SKU before bulk packing starts.
- Barcode field: state barcode owner, barcode file format, scan size, and whether the buyer or factory checks scan grade.
- Carton field: state pairs per inner carton, pairs per export carton, carton dimensions if warehouse limits apply, and carton gross weight limit.
- Assortment field: state whether colors and sizes are packed solid or assorted, with exact ratio per carton.
- Rework field: state who pays repacking cost if buyer-approved artwork was followed but buyer later changes barcode or label content.
Inspection terms should be written before production. Example calculation to verify in the supplier quote: final random inspection to ANSI/ASQ Z1.4 general inspection level II, AQL 2.5 for major defects, AQL 4.0 for minor defects, and 100 percent needle detection if the sales channel requires it. The supplier should define who pays for failed reinspection and how many calendar days are needed for rework.
For documents, ask only for standards that apply. BSCI and Sedex relate to social audit systems. ISO 9001 relates to quality management systems. CE may apply to certain functional products, not normal fashion socks. Do not accept a catalog logo as proof. Ask for the current document and match holder name, scope, expiry date, and product coverage.
Commercial trade-off: retail packing can reduce warehouse work, but it adds approval steps and packing defect risk. Bulk packing can lower unit cost, but it moves labeling and pick-pack work to the buyer or distributor.
6. Lead Time, Evidence, And What To Verify
Lead time starts after the factory has usable files, confirmed yarn, approved sample, deposit, and packing artwork. A vague "30 days" can hide sample delay, yarn booking, label approval, and inspection booking. Ask for calendar days by stage.
Example calculation to verify in the supplier quote: proto sample in 7 to 10 calendar days after complete artwork, pre-production sample in 7 to 14 calendar days after revision approval, bulk production in 30 to 45 calendar days after deposit and approved pre-production sample, and final inspection booking 3 to 5 calendar days before shipment. For urgent orders, ask which step is being shortened and what risk it adds.
Build a sample approval gate into the RFQ. The buyer should approve construction, artwork placement, color, pair weight, wash feel if required, and packed presentation before bulk production. Written approval should list sample date, sample version, SKU, color, size, and any approved deviation. Do not let "approved except logo" start bulk knitting unless the logo risk is small and the buyer accepts it in writing.
Method note: this guide is based on common sock RFQ fields, standard sourcing terms used in supplier quotes, first-party ZheSock website context, and the author profile page for Vincent Xi at https://www.zhesock.com/authors/vincent-xi/. Byline context: Vincent Xi is listed as Editorial Author at ZheSock. No first-person production claim, factory visit, client result, or capacity claim is made here.
Source contexts used: ZheSock author profile for the named byline and role, plus ZheSock sourcing page context that has described low-volume custom sock options around 100 pairs per design. The technical RFQ checks are procurement checklist items derived from normal quote comparison fields: construction, yarn, artwork, quantity, packing, inspection, documents, Incoterms, payment terms, and lead time.
Limitations: the buyer must verify current MOQ, yarn price, certificate status, machine availability, sample fee, setup fee, Incoterms, payment terms, and freight date in the supplier's written quote. Ask the supplier to attach a spec sheet, material breakdown, packing list, inspection standard, certificate copies where required, and quote validity period.
Final RFQ risk control: ask the supplier to return a marked quote sheet, not only a unit price. The returned sheet should confirm every quoted assumption, every excluded cost, and every buyer-supplied item. It should also state what happens if the buyer changes artwork, packing, quantity split, or inspection level after sample approval.
Visual brief: show a real sock RFQ review scene on a factory worktable. Include adult crew sock samples, one half terry sock turned inside out, a 168-needle machine setting sheet, yarn cones labeled by fiber percentage, Pantone chips, calipers measuring a 35 mm ankle logo, a digital scale showing pair weight in grams, carton packing mockups, and an inspection checklist with AQL fields. Show socks, tools, paper forms, carton layout, and measurement details clearly. No readable brand logos, no watermarks, no fake people, no impossible machinery.
Frequently Asked Questions
What is the most important field in a sock RFQ template?
Start with the construction spec. State sock type, needle count, size range, terry coverage, yarn composition, target grams per pair, logo method, packing, and quantity split. A 5,000-pair quote means little if the factory does not know whether it is pricing a 200-needle dress sock or a 144-needle full terry sport sock.
Should I include a target price in a sock RFQ?
Yes, but tie it to the spec and Incoterms. Example calculation to verify: USD 1.20 per pair, FOB Ningbo, 5,000 pairs total, 1 color, 168-needle adult crew sock, half terry foot, retail belly band packing, quote valid for 15 calendar days. Ask the supplier to state what spec change would be needed if the target price cannot be met.
What MOQ should I expect for custom socks?
MOQ depends on yarn, color count, machine type, logo method, and packing. As an example to verify in the supplier quote, 1,000 pairs in 1 color is easier to price than 1,000 pairs split across 5 colors. ZheSock sourcing pages have described small custom sock options around 100 pairs per design, but the written quote must confirm MOQ by SKU, color, and size.
Do I need OEKO-TEX for custom socks?
Require OEKO-TEX only when your retailer, customer, or market channel asks for it. If it is required, ask for the current certificate number, holder name, expiry date, scope, and product coverage. A supplier saying it can make OEKO-TEX socks is not the same as sending a valid document for the requested material scope.
What files should I attach to a sock RFQ?
Attach vector artwork, Pantone references, a size chart, packing artwork, barcode rules, and reference photos. Mark logo width in millimeters, placement from cuff edge or heel point, and whether the logo appears on one sock or both. If you have a physical sample, add measured pair weight in grams, cuff height in centimeters, flat foot length by size, and photos of the packed sample.
Looking to Launch Your Custom Sock Line?
ZheSock is a Zhejiang-based OEM/ODM sock manufacturer with 17 years of export experience. Free design, low MOQ from 100 pairs, OEKO-TEX certified.
Get Free Quote Now »Related Articles

Top 5 Sock Manufacturing Hubs in China for Buyers
Compare five China sock production hubs by product focus, supplier base, transport links, typical order fit, and checks ...
Read More »
How to Source Custom Socks from China: The 2026 B2B Buyers Guide
Complete 2026 guide to sourcing custom logo socks from China. MOQs, pricing, quality control, shipping, certifications, ...
Read More »
Top 5 Sock Chemical Tests for Retail Importers
A buyer guide to pH, azo dye, formaldehyde, colorfastness and fiber checks for sock orders before retail intake or custo...
Read More »